LIT-218
NICO
Corporation
Rev. C
(English)
Page 10 of 22
5.2 CONNECTING THE Myriad-LX FIBER
Connect the Myriad-LX Illumination fiber to the Myriad Handpiece per the relevant IFU.
Insert the Illumination Fiber’s proximal connector into the port of the turret on the front
panel.
You may notice a very slight
normal
resistance to insertion as the tip opens the auto
shutter. Push the tip all the way in.
6. OPERATION
6.1 POWERING UP THE ILLUMINATOR
To operate the illuminator: First attach the fiber to the
ILLUMINATOR
.
Turn on the rear power switch. Turn on the front lamp switch.
The lamp switch will light up and the fan will start. The touch screen will display
for three seconds, followed by the
normal operating display
:
6.2 TOUCH SCREEN FUNCTIONS
6.2.1 FAULT CONDITION NOTICES
There are twelve fault conditions detectable by sensors that will render the illuminator
inoperable until they are corrected. A fault condition notice will appear on the screen
identifying the fault and how to correct it.