Nice WIDEL, Инструкция по использованию, установке и безопасности

Страница: 2 / 36

CE declaration of conformity
and declaration of incorporation of partly-completed machinery
Declaration in accordance with the following Directives:
2014/30/UE (EMC); 2006/42/CE (MD) annex II, part B
Note: The contents of this declaration correspond to declarations in the official document filed in the offices of Nice S.p.A. and, in par-
ticular, the latest version thereof available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A
copy of the original declaration can be requested from Nice S.p.A. (TV) Italy.
Declaration number: 561/WIDE Revision: 2 Language: EN
Manufacturer's Name: NICE S.p.A.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Person authorised to compile the technical documentation: NICE S.p.A.
Type of product: Electro-mechanical barrier
Model / Type: WIDES, WIDESI, WIDEM, WIDEMI, WIDEL, WIDELI
Accessories: -
The undersigned, Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
comply with the provisions of the following directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
• DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 60335-2-103:2003 +A11:2009
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending directive
95/16/EC (consolidated text)
- It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive
2006/42/CE and that the following essential requirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2-
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the
partly completed machinery. This shall be without prejudice to the intellectual property rights of the manufacturer of the partly completed
machinery.
- Should the partly completed machinery be put into service in a European country with an official language different to the one used in
this declaration, a translation into that language must be provided by the person bringing the machinery into the language area in question.
- The partly completed machinery may not be put into service until the final machinery into which it is to be incorporated has been declared
in conformity with the provisions of Directive 2006/42/EC, where appropriate.
All parts of the product subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 14 June 2016 Ing. Roberto Griffa
(Chief Executive Officer)