TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
MX4685 REV. A ©2019 Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 www.hysecurity.com |
17
NOTE:
If a gate moves in opposite direction from what is expected, reverse the motor power lead wiring (red &
black wires) for that motor.
In dual gate systems, the longer actuator cable is usually connected to MOTOR 2.
IMAGE 9C-2:
1050 BOARD - PULL-TO-OPEN - DUAL GATE
IMAGE 9C-1:
1050 BOARD - PULL-TO-OPEN - SINGLE GATE
9C
1050 CONTROL BOARD WIRING: PULL-TO-OPEN
MOTOR 1
MOTOR 1
MOTOR 2
2nd ACTUATOR WITH
LONGER HARNESS
TO MOTOR 2
IMPORTANT!
For dual gate
systems, wire the 2nd harness
into the connector, but do not
connect it to the control board
yet. It will be connected at a
later step.
5.3 1050 CONTROL BOARD WIRING: PULL-TO-OPEN
