TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
18
|
www.hysecurity.com Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 MX4685 Rev. A ©2019
IMAGE 9D-2:
1050 BOARD - PUSH-TO-OPEN - SINGLE GATE
IMAGE 9D-1:
1050 BOARD - PUSH-TO-OPEN - SINGLE GATE
9D
1050 CONTROL BOARD WIRING: PUSH-TO-OPEN
MOTOR 1
MOTOR 1
MOTOR 2
2nd ACTUATOR WITH
LONGER HARNESS TO
MOTOR 2
IMPORTANT!
For dual gate
systems, wire the 2nd harness
into the connector, but do not
connect it to the control board
yet. It will be connected at a
later step.
NOTE:
If a gate moves in opposite direction from what is expected, reverse the motor power lead wiring (red &
black wires) for that motor.
In dual gate systems, the longer actuator cable is usually connected to MOTOR 2.
5.4 1050 CONTROL BOARD WIRING: PUSH-TO-OPEN
