TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
16
|
www.hysecurity.com Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 MX4685 Rev. A ©2019
IMAGE 9B-2:
936 BOARD - PUSH-TO-OPEN - DUAL GATE
IMAGE 9B-1:
936 BOARD - PUSH-TO-OPEN - SINGLE GATE
9B
936 CONTROL BOARD WIRING: PUSH-TO-OPEN
WHITE
BLUE
GREEN
YELLOW
ORANGE
BLACK
RED
MOTOR 1
WHITE
BLUE
GREEN
YELLOW
ORANGE
BLACK
RED
BLUE
GREEN
YELLOW
BLACK
RED
WHITE
ORANGE
MOTOR 1
MOTOR 2
NOTE:
If a gate moves in opposite direction from what is expected, reverse the motor power lead wiring (red &
black wires) for that motor.
In dual gate systems, the longer actuator cable is usually conneted to MOTOR 2, but if the actuator with
longer cable has a shorter run time it may be connected to MOTOR 1 instead of MOTOR 2 if the Gate
Sync option is used.
IMPORTANT!
For dual
gate systems, wire the
2nd harness into the
connector, but do not
connect it to the control
board yet. It will be
connected at a later step.
2nd ACTUATOR WITH
LONGER HARNESS
TO MOTOR 2
5.2 936 CONTROL BOARD WIRING: PUSH-TO-OPEN
