Nice mindy A60, Инструкции и предупреждения по установке и использованию

Страница: 5 / 116

5
2.1) Operating limits
Chapter 9 “Technical Characteristics” provides the only data needed to determine whether the products are suitable for the intended appli-
cation.
2.2) Typical system
1. Control Unit A60
2. Flashing light with incorporated aerial
3. Key-operated selector switch
4. Motors
5. Couple of photoelectric cells PHOTO
6. Couple of photoelectric cells PHOTO 1
7. Sensitive edge
8. Radio transmitter
2
2.3) List of cables
The typical system shown in figure 2 also states the cables required for connection of the various devices, the specifications of which are
provided in table 1.
! The cables used must be suitable for the type of installation; for example, an H03VV-F type cable is recommended for indoor
applications, while H07RN-F is suitable for outdoor applications.
Note 1:
power supply cable longer than 30m may be used provided it has a larger gauge, e.g. 3x2,5mm
2
, and that a safety earthing system
is provided near the automation unit.
Connection Tipo cavo Maximum admissible length
A: Electrical power line N°1 cable 3x1,5mm
2
30m (note 1)
B:
Flashing light with aerial N°1 cable 2x0,5mm
2
20m
N°1 shielded cable type RG58 20m (less than 5m recommended )
C:
Electric lock N°1 cable 2x1mm
2
20m
D:
Photocells N°1 cable 2x0,25mm
2
(Tx) 30m
N°1 cable 4x0,25mm
2
(Rx) 30m
E:
Key-operated selector switch N°1 cable 4x0,25mm
2
30m
F:
Connection to the motors. N°1 cable 4x1,5mm
2
3m
G:
Connection to sensitive edge N°1 cable 2x0,25mm
2
30m
Table 1: List of cables
EN
www.metalines.com sales@metalines.com