Nice GDS 450LI, Руководство по установке и обслуживанию

Страница: 15 / 16

8. M
AIN TE N AN CE
D
E TAI LS
WARNING!
Failure to maintain equipment may result in injury or death and/or damage to property and equipment
Recommended maintenance to be performed on the operator and gate are as follows:
Operator performs over 150 cycles a day each month
Operator performs between 100-150 cycles a day every 2 month
Operator performs between 50-99 cycles a day every 4 months
Operator performs between 20-49 cycles a day every 6 months
Operator performs under 20 cycles a day every 12 months
Date: ..........................................................................................
Site Name: .....................................................................................................................................................
Site Address: ..................................................................................................................................................
Before commencing maintenance on the operator, isolate the electrical supply to ensure operator will not run
inadvertently.
Gate rolls freely when in manual ....................................................................................

Gate wheels and guide rollers in good condition ............................................................

Gate stops are installed and in good condition, not loose ...............................................

Gate rack is tight & correct clearances between pinion wheel & rack............................

Gate track is not damaged ...............................................................................................

Gate operator mounting bolts tight..................................................................................

No oil leaks from gearboxes............................................................................................

Gearbox mounting bolts/nuts tight ..................................................................................

Inside operator and control box clean .............................................................................

‘Baygon’ Surface Spray around operator and control box (not on electronics) ..............

All electrical connections tight........................................................................................

Limit Switches operate in appropriate positions / chain oiled ........................................

External safety devices work effectively / cleaned .........................................................

Electromagnetic lock, if fitted, operates correctly and is clean ......................................

Wash down of control box and cover (particularly near corrosive/sea environments)...

General operation i.e. speed, auto close etc normal ........................................................

Comments............................ ..................................................................................................... ......
.........................................................................................................................................................
...........................................................................................................................................................
Service performed by :......................................................................................................................