2
– English
English
PRODUCT DESCRIPTION
––– STEP 2 –––
2.1 – APPLICATIONS
AVIO is a line of gearmotors designed for the automation of sectional
doors and the suitable GA2 accessory, not supplied, or overhead (springs
or counterweights) doors.
Any applications other than those described above or in different
conditions from those specified in this manual are forbidden.
AVIO operates with electric power. In the event of a power failure, the
gearmotor can be released using a suitable cord in order to move the
door manually.
As an alternative, the optional accessory can be used on the AVIO1000
model: PR100 buffer battery.
2.3 – DESCRIPTION OF DEVICES
AVIO600 and AVIO1000 can be made-up of the devices shown in Fig. 2;
make immediately sure that they correspond to the contents of the pack-
age and verify the integrity of the devices.
Note:
to adapt AVIO600 and AVIO1000 to local regulations, the contents
of the package may vary; an exact list of the contents is shown on the
outside of the package. Anyhow, please consult the sales manager.
Reference
a
b
c
d
e
f
g
h
AVIO600
1 AVIO600 electromechanical gearmotor with incorporated
control unit
1 3-metre guide with pre-assembled belt.
2 coupling profiles
2 ceiling-mounted brackets
Miscellaneous small parts: screws, washers, etc. see tables
1, 2, 3 and 4 (*)
2 ECCO5... radio transmitters
PH200 pair of wall-mounted photocells
FL200 flashing light with incorporated aerial
AVIO1000
1 AVIO1000 electromechanical gearmotor with incorporated
control unit
1 4-metre guide with pre-assembled belt.
3 coupling profiles
4 ceiling-mounted brackets
Miscellaneous small parts: screws, washers, etc. see tables 1,
2, 3 and 4 (*).
2 ECCO5... radio transmitters
PH200 pair of wall-mounted photocells
FL200 flashing light with incorporated aerial
TABLE 2 - Component and accessory list
Gearmotor type
Maximum torque (corresponding to the maximum force)
Max. No. of ECSBus units
Emergency power supply
Guide length
AVIO600
10,8 Nm (600 N)
6
with PR100
3x1m
TABLE 1 - Comparison of main features of the AVIO gearmotors
AVIO1000
18 Nm (1000 N)
6
with PR100
4x1m
2.2 – DESCRIPTION OF THE AUTOMATION
To clarify a few terms and aspects of a sectional or overhead door auto-
mation system: in Figure 1 we provide an example of a typical AVIO600 or
AVIO1000 application:
A)
FL200 flashing light with incorporated aerial (optional)
B)
Pair of PH200 photocells (optional)
C)
Mechanical stops
D)
AVIO600 or AVIO1000 gearmotor
* The screws required for mounting AVIO600 and AVIO1000 are not supplied as they depend on the type of material and its thickness
1
A
D
C
B
