Chapter 3
5B Series Modules
©
National Instruments Corporation
3-3
SC-2311 User Manual
5B35 RTD Input—Isolated 4-Wire RTD Module
The 5B35 RTD input modules are capable of making isolated 4-wire RTD
measurements. Like the 5B34, the 5B35 scales the RTD temperature
measurement into a 0–5 V output signal that the E Series DAQ device can
measure.
You can insert and use the 5B35 RTD input modules in any of the eight
5B channels inside the SC-2311.
5B36 Potentiometer Input Module
The 5B36 potentiometer input modules accept a wide variety of 3-wire
potentiometers and 2-wire rheostats. The 5B36 scales the potentiometer
measurement into an accurate 0–5 V output signal that is routed from the
SC-2311 to the E Series DAQ device for measurement.
You can insert and use the 5B36 potentiometer input modules in any of the
eight 5B channels inside the SC-2311.
5B37 Thermocouple Input Module with
Cold-Junction Compensation
The 5B37 thermocouple input module is capable of accepting input signals
from J, K, T, E, R, S, and B type thermocouples. The 5B37 also uses
cold-junction compensation circuitry, which is part of the SC-2311
accessory, to compensate for the parasitic thermocouples formed at the
input screw terminals of the SC-2311. The 5B37 scales the input signals
from the thermocouples into a 0–5 V output signal that is routed from the
SC-2311to the E Series DAQ device for measurement.
You can insert and use the 5B37 thermocouple input modules in any of the
eight 5B channels inside the SC-2311.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com