Nexgrill NEEVO 720-1055, Руководство пользователя

Страница: 4 / 136

4
SAFETY INSTRUCTIONS
TESTED IN ACCORDANCE WITH ANSI Z21.58-2018 • CSA 1.6-2018 STANDARD FOR OUTDOOR COOKING
GAS APPLIANCE. THIS GRILL IS FOR OUTDOOR USE ONLY.
GRILL INSTALLATION CODES
Check your local building codes for the proper method of installation. In the absence of local codes, this unit should
be installed in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of
Liquefied Petroleum Gases, ANSI /NFPA B149.2 or CSA B149.1 Natural Gas and Propane Installation Code, and the
National Electrical Code, ANSI/NFPA 70.
CORRECT LP GAS TANK USE
LP gas grill models are designed for use with a standard 9.07 kg (20 lb). Liquid Propane Gas tank, not included
with grill.
Never connect your gas grill to an LP gas tank that exceeds this capacity.
NOTE
The normal flow of gas through the regulator and hose
assembly can create a humming noise. A low volume of
noise is perfectly normal and will not interfere with
operation of the grill. If humming noise is loud and
excessive you may need to purge air from the gas line
or reset the regulator excess gas flow device. This
purging procedure should be done every time a new LP
gas tank is connected to your grill.
Visually check the burner flames prior to each use.
The flames should look like this picture. If they do not,
refer to the burner maintenance part of this manual.
SPIDER WEB INSPECTION
WARNINGS:
•
Do not try lighting this appliance without reading the "LIGHTING INSTRUCTIONS" section of this
manual.
•
Keep a spray bottle of soapy water near the gas supply valve and check the connections before
each use.
CAUTION: BEWARE OF FLASHBACK
Spiders and small insects occasionally spin webs or make nests in the grill burner tubes during transit
and warehousing. These webs can lead to gas flow obstruction, which could result in
a fire in and around burner tubes. This type of fire is known as “FLASH-BACK” and can cause serious
damage to your grill and create an unsafe operating condition for the user.
Although an obstructed burner tube is not the only cause of “FLASH-BACK”, it is the most
common cause.
To reduce the chance of “FLASH-BACK”, you must clean the burner tubes before assembling your grill,
and at least once a month in late summer or early fall when spiders are most active. Also perform this
burner tube cleaning procedure if your grill has not been used for an extended period of time. A clogged
tube can lead to a fire beneath the grill.