H
C
13.Sear Side Burner Assembly
(a). Loosen but do not remove two
screws which are pre-assembly on the
right side panel, through sear side
burner shelf keyholes hang sear side
burner shelf on two loosened screws.
(b). Using (3)
¼”
truss head screws (A),
(3)
¼”
flat washer (E), attach sear side
burner shelf (C)to firebox from inside
the firebox. Insert (2) 5/32
”
truss head
screws (C),(2) 5/32
”
flat washers (F) to
attach the sear side burner shelf control
panel to the main control panel. Fully
tighten the two loosened screws to
secure shelf to firebox.
12. wire connection
Connect the wire from firebox to that from LED light
battery box . See Fig.17
Fig. 17
Fig. 18
19
