background image

W A R N I N G

Failure to follow all of the Manufacturer’s

instructions could result in hazardous

fires, explosions, property damage, or

serious personal injury or even death.

W A R N I N G

Follow all leak check procedures carefully

prior to operation of barbecue, even if 

grill was dealer assembled. Do not try to

light this barbecue without reading the

Lighting Instructions section of this manual.

T H I S   B A R B E C U E   I S   F O R  

O U T D O O R   U S E   O N L Y

W A R N I N G

1. Do not store or use gasoline or other

flammable vapours and liquids in the
vicinity of this or any other appliance.

2. An LP cylinder not connected for use

shall not be stored in the vicinity of this
or any other appliance.

D A N G E R

If you smell Gas
1. Shut off gas to the appliance. 
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the

appliance and immediately call your
gas supplier or your fire department.

H405 Propane Barbecue

S A F E   U S E ,   C A R E   A N D   A S S E M B L Y   M A N U A L

S E R I A L # :

O N E   Y E A R   L I M I T E D   W A R R A N T Y

8 5 - 1 6 3 1

G 4 3 7 0 2

Read and save this manual for future reference. 

If pre-assembled, leave this manual 

with unit for consumer’s future reference.

For product inquires, parts, and warranty and 

troubleshooting support, please call 1-877-707-5463.

Содержание H405

























Отзывы: