21
2. Take out the searing side burner from the firebox. Locate orifice on end of valve and remove by turning
counterclockwise with a 6mm Nut Driver
3. Insert NG orifice with a 6mm Nut Driver, then secure and turning clockwise in tightly. Replace the searing
side burner, searing side burner and igniter wire back.
Rear Burner Conversion
Tools Required
Phillips Head Screwdriver (+)
6mm wrench
Steps:
1. Remove the cover of the rear burner by unfastening the screws in the firebox. Use another hand to hold the
orifice cover to keep it from falling when removed.
2. Use a pair of pliers to keep the orifice from moving. Do not move the orifice housing while using a 6mm
wrench to unscrew and remove the LP orifice.
Figure 325
CSA International
Project 2070363
22 of 31
