19
3. Screw the Regulator on the right side panel from inside to outside.
4. Install the NG regulator hose to the manifold and secure using a wrench.
Main Tube Burner Conversion
Tools Required
Phillips Head Screwdriver (+)
6mm Nut Driver
Steps
：
1. Remove the main tube burners by removing the screw securing the burners near the back wall of the firebox
and the screws near the front of the firebox that secure the igniter brackets to the burners. Gently lift the
question mark burners up and out.
Figure 325
CSA International
Project 2070363
20 of 31
