FORM NO. L-20179-F-1002
4
INSTALLATION
MOUNTED ON THE SHAFT END OF A MOTOR
1.
Insert the customer supplied key into the motor
shaft keyway (See Figure 1).
2.
Slide the FMCB onto the motor shaft, then secure it
to the motor using customer supplied socket head
cap screws and lock washers (See Figure 1).
3.
Tighten the Set Screw (See Figure 1).
NOTE: On Models 130-19 and 130-24, the Set Screw is
Item 27. On all other models, the Set Screw is Item 35.
4.
Install the Housing Guard over the open areas of
the FMCB and secure it using the fasteners
provided with the Housing Guard (See Figure 1).
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 2
Figure 2
Figure 2
Figure 2
Figure 2
1.
Insert the Key (Item 25 or 33) into the output shaft
of the FMCB (See Figure 2).
NOTE:On Models 130-19 and 130-24, the Key is Item
25. On all other models, the Key is Item 33.
2.
Slide the FMCB output shaft into the gear reducer
(See Figure 2).
3.
Secure the FMCB to the gear reducer using
customer supplied socket head cap screws, lock
washers, and nuts (See Figure 2).
4.
Insert the customer supplied key into the motor
shaft keyway (See Figure 2).
5.
Slide the motor into the FMCB and secure it to the
FMCB using customer supplied socket head cap
screws, lock washers, and nuts (See Figure 2).
6.
Tighten the Set Screw (See Figure 2).
NOTE:On Models 130-19 and 130-24, the Set Screw is
Item 27. On all other models, the Set Screw is Item 35.
7.
Install the Housing Guard over the open areas of
the FMCB and secure it using the fasteners
provided with the Housing Guard (See Figure 2).
MOUNTED BETWEEN A GEAR REDUCER
AND A MOTOR
Motor
Customer
supplied Key
Set Screw
(Item 27 or 35)
Customer supplied socket
head cap screw and lock
washer
Housing
Guard
FMCB
Customer supplied socket
head cap screw, lock washer,
and nut
Motor
Customer
supplied key
Set Screw (Item
27 or 35)
Key (Item 25 or 33)
Customer supplied socket
head cap screw, lock
washer, and nut
Gear
Reducer
Housing
Guard
FMCB
®
DIST. AUTORIZADO
MEX (55) 53 63 23 31
QRO (442) 1 95 72 60
MTY (81) 83 54 10 18
[email protected]
