FORM NO. L-20179-F-1002
10
PARTS REPLACEMENT (HOUSING BEARING)
1.
Remove the four Socket Head Cap Screws (Item
13) and slide the Housing (Item 1), Bearing (Item
2), and the Drive Disc (Item 4) out of the FMCB
(See Figure 11).
2.
Remove Retaining Ring (Item 6) (See Figure 11).
3.
Press the Drive Disc (Item 4) out of the Bearing
(Item 2) and the Housing (Item 1) (See Figure 11).
4.
Remove Retaining Ring (Item 3) (See Figure 11).
5.
Fully supporting the Housing (Item 1), press the old
Bearing (Item 2) out of the Housing (See Figure
11).
NOTE: Do not reuse the bearing. Applying force
to the inner bearing race to remove a bearing
held by the outer race causes damage to the
bearing.
6.
Clean the bearing bore of the Housing (Item 1) with
fresh safety solvent, making sure all old Loctite
®
residue is removed (See Figure 11).
7.
Apply an adequate amount of Loctite
®
680 to
evenly coat the outer race of the new Bearing (Item
2) (See Figure 11).
8.
Carefully align the outer race of the new Bearing
(Item 2) with the bore of the Housing (Item 1) (See
Figure 11).
9.
Supporting the Housing (Item 1) and pressing on
the outer race of the new Bearing (Item 2), press
the new Bearing into the Housing.
10. Reinstall Retaining Ring (Item 3) (See Figure 11).
11. Support the inner race of the new Bearing (Item 2)
and press the Drive Disc (Item 4) into the new
Bearing and Housing (Item 1) (See Figure 11).
12. Reinstall Retaining Ring (Item 6) (See Figure 11).
13. Apply a drop of Loctite
®
242 to the threads of the
Socket Head Cap Screws (Item 13) (See Figure
11).
14. Slide the Housing (Item 1), Bearing (Item 2), and
Drive Disc (Item 4) into the FMCB and reinstall the
four Socket Head Cap Screws (Item 13) (See
Figure 11).
15. Tighten the four Socket Head Cap Screws (Item
13) to 24.5 Ft. Lbs. [33.2 N•m] torque.
Always wear safety
goggles when
working with spring
or tension loaded
devices such as
retaining rings.
WARNING
Figure 11
Figure 11
Figure 11
Figure 11
Figure 11
6
6
6
6
6
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
13
13
13
13
13
NOTE: The following sections are arranged by model. Verify that you are in the correct section for your model.
FMCB 130-19 AND 130-24
®
DIST. AUTORIZADO
MEX (55) 53 63 23 31
QRO (442) 1 95 72 60
MTY (81) 83 54 10 18
[email protected]
