Nexdio DioView 100, Руководство пользователя

Страница: 5 / 22

DioView 100 – User’s Guide
DioView 100
- User’s Guide Page 5 of 22
Nexdio Co., Ltd.
3 BEFORE YOU BEGIN
Before using the
DioView 100
, several tasks are required to be performed.
This section will explain how to complete these tasks.
3.1 Install the batteries in the DioView 100 (2xAA Alkaline)
♦
Remove the battery cover
(1) Press the ≡ mark on the battery cover.
(2) Pull the battery cover down fully.
(3) Separate the battery cover from the
DioView 100.
♦
Install the two AA batteries
(1) Visually confirm the correct battery polarities as marked on the compartment.
(2) Place the two AA size batteries in the compartment with the correct polarities.
(3) Insert the catch on the battery cover in the corresponding slot on the
DioView 100.
(4) Push down and slide the battery cover toward its upper side until it locks into place.
♦
Using the batteries for the DioView 100
(1) Two brand new batteries (Premium class AA size alkaline) will provide up to 8 hours of
operations at 800 x 600 slide resolution, and up to 6.5 hours of operations at 1024 x 768 slide
resolution.
(2) Using “Narration Mode” presentations, the battery life may be reduced up to 50%. See section
“6.2” and “6.7” for more information about the presentations.
(3) A low battery indicator will appear on the LCD screen of the DioView 100 when the battery is
at a low level. See section “6.8” for more information.
<Note
>
It is highly recommended NOT installing pre-used batteries in your DioView 100.
For optimal use, ALWAYS INSTALL BRAND NEW and HIGH CAPACITY AA size (UM-3)
ALKALINE BATTERIES (+1.5V per cell) in your DioView 100.
The DioView 100 does not have a charging feature for rechargeable batteries.
It is NOT recommended installing rechargeable AA batteries in your DioView 100.
(1)
(2)
(3)
(1), (2)
(3)
(4)
<Note
>
For long or continuous presentations, you can use the provided DC adaptor. When the
DC adaptor is plugged into the DioView 100, the batteries will be disconnected automatically.
Please DO NOT USE aftermarket DC adapters; this may damage the DioView 100.