Newport Oriel VeraSol LSH-752, Руководство пользователя, Страница: 33 / 46

March 2019 29 VeraSol
LEDTEST:POWER?
Description
Sequentially turns on each LED while measuring the output power.
Parameters None
Return Returns 1 when the test is finished. Returns 0 if the test fails due to a hardware problem.
NOTE: the test takes several seconds before it returns a result.
LEDTEST:RESULT? <LED #>
Description
Returns the powers measured during factory led test and during user led test.
Parameters Led number
Return user-measured power, factory-measured power
LEDWAVElength? <LED #>
Description Requests the peak wavelength of each LED (in nm).
Response A floating-point number representing the main LED wavelength.
Example LEDWAVE? 5<cr> Response: 505, indicating that LED 5’s peak wavelength is 505 nm.
OUTPut ON|OFF|1|0
OUTPut?
Description Controls whether the output is enabled or not
Parameters ON/1: Turns the output on
OFF/0: Turns the output off
Reset Value OFF
SPECTrum:STORe <location>
Description Store the current spectrum into memory locations 1-10.
Parameter 1 – 10 – memory location; location 0 is reserved for AM 1.5G factory determined spectrum
SPECTrum:RECAll <location>
Description Recalls a spectrum saved into memory location. Adjust LED intensity to match saved spectrum.
Parameters 0-10 – Location 0 is reserved for the factory default AM1.5G Spectrum.
Location 1 is the “custom” spectrum available from the front panel.
SPECtrum:ACTIVe?
Description Returns the location number of the current active spectrum.
Parameters None