Newport OPHIR EA-1 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 53

Newport OPHIR EA-1 Скачать руководство пользователя страница 53

53

Appendix 4 - Version History:

[Any questions? Errors in the document? Please contact [email protected] with your comments]

v1 - 29-Feb-16

First version

v2 - 3-Mar-16:

Fixed application folder name to “Ophir Ethernet Application”
Added location of USB drivers in application installation folder.

v3 - 16-Mar-16:

Notes on log files; expanded details of connecting direct from a PC; details of UDP protocol;

v4 - 13-Apr-16:

Added more information about GLOBAL_LOG.log in section on “Buffer Files”
Added $ii command details in chapter 6.

v5 - 4-May-16:

Minor update

v6 - 26-Apr-17 (BETA version; PC app rev 1.10; firmware v1.11):

Special version adding continuous send modes for PE-C/PD-C sensors.
Added sub-section “Continuous Sends Modes for Pyroelectrics/PD-C Sensors” in chapter 6.
Other minor changes in chapter 6.

v7 - 11-May-17 (PC app rev 1.12; firmware v1.12):

Added details of UDP connection protocol in commands section.
Minor corrections in commands section

v8 - 1-Jun-17 (PC app rev 1.12; firmware v1.12)

Change in way version/date is displayed at bottom of last page.
Fixed comment in General Description about Pyroelectric support
Added Pyro-C commands $DQ, $PL, $UT

v9 12-Feb-18 (PC app rev 1.14; firmware v1.14-1)

Changes to support version 1.14, several new screen-shots.
Removed mention of CD and replaced with files available on website.
Added Port Numbers for Telnet, UDP, HTTP.

v10 15-Apr-18 (PC app rev 1.14; firmware v1.14-2)

Updated instructions for telnet connections on windows 7 & laptops.
Expanded Appendix 2 on how to connect between laptops/PC and EA-1.
Added paragraph about selecting a new IP address in chapter 2 “choosing new IP address for EA-1 device”.
Added Appendix 3 on choosing cables and ground isolation.

Ethernet Adapter EA-1 User Manual

15 Apr 2018

Rev 1.14-2

«
...
51
52
53

Содержание OPHIR EA-1






















































Отзывы:

Нет отзывов