Newport OPHIR EA-1 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 53

Newport OPHIR EA-1 Скачать руководство пользователя страница 25

25

The location of firmware files is under the application installation folder, usually:

C:\Program Files\Ophir Optronics\Ophir Ethernet Application\Firmware\

or:

C:\Program Files (x86)\Ophir Optronics\Ophir Ethernet Application\Firmware\

Note:

It is recommended not to upgrade firmware unless a new version is actually available.

If a firmware upgrade is not actually required, the following message will be displayed; answer “no” to abort the
firmware upgrade:

In the event that a new firmware upgrade is available and necessary, the software will continue with the upgrade
automatically.

Note:

Do not disconnect the communications or power cables while the firmware is being upgraded. Firmware

upgrade takes ~5 minutes.

In the event that the firmware upgrade is disrupted before it is finished, the device will start up in a special “Boot”
mode after the next power up. In that case, the firmware upgrade can be repeated and completed using the same
menu and method as above.

Note:

It is recommended that the device be powered off and on again after performing a firmware upgrade, this is

especially important when using DHCP mode.

Zeroing:

Choose the Zero option in the menu:

The following window will appear:

«
...
23
24
25
26
27
...
»

Содержание OPHIR EA-1






















































Отзывы:

Нет отзывов