Newport FSM-300, Руководство пользователя

Страница: 29 / 42

System Components 29
directly into most wall outlets. The appropriate power cord for the destination
country should be included with your controller. If the correct cord is not
present please contact your local Newport representative for assistance.
Rs
I sense
(-)
(+)
DRIVER A
A-axis
Command
(-)
(+)
X-axis
Control
A-axis
Position
X-axis
OL Command
X-axis
Ext. Optical
Feedback
X-axis
Command
X-axis
Position
B-axis
Position
Rs
I sense
(-)
(+)
DRIVER B
B-axis
Command
(-)
(+)
Y-axis
Control
B-axis
Position
Y-axis OL Command
Y-axis
Ext. Optical
Feedback
Y-axis
Command
Y-axis
Position
A-axis
Position
A-axis
Position
A-axis
Position
A- axis
actuator drive
B- axis
actuator drive
A- axis position
B- axis position
X - axis
Command
Y - axis
Command
INT/EXT
OL/CL
OL/CL
+15VDC
-15VDC
Pwr Supply
J1
120/220 VAC
60/50 Hz
RED
OVERTEMPERATURE
FAULT DETECTION
Internal/External
Feedback
J2
GREEN
YELL
OVERCURRENT
Figure 12: Functional Block diagram of FSM-CD300B controller/driver.
5.4 FSM-CD300B Controller/Driver Cable Pin Connections
The electrical connection between the mirror head and the controller/driver
is via a 15-pin D-connector terminated cable. This cable attaches between the
connector located on the back of the mirror head and the connector labeled
“FSM” on the front of the FSM-CD300B controller/driver. The position sen-
sors and voice coils are located on
A
and
B
axes (at 45
°
to the
X
and
Y
axes).
A coordinate transform is done in the controller/driver to produce
X
and
Y
axis rotations.