Newport Cornerstone 130B, Руководство пользователя

Страница: 67 / 75

90088262 MCS130B
CORNERSTONE 130B MONOCHROMATORS
67
enter the known wavelength. Then press ENTER to change the calibration. The
current grating is thus calibrated (by applying an offset) over its entire range.
SHUTTER Open and close the shutter by pressing this button. The shutter position is
shown in the display as “OPN” for open and “CLS” for closed.
SHIFT PORT This function is disabled for this model.
FILTER Move the Filter Wheel accessory to the specified position. Press FILTE R, t hen
type the number 1, 2, 3, 4, 5, or 6 indicating the desired position, then finally
press ENTER to execute the move.
SHIFT LABEL This key (located directly above FILTER) provides access to the filter label.
These labels are eight character alphanumeric fields, used for information only .
You can use the keypad to type any number, then press ENTER to accept t hat
new value. The Hand Controller display only shows the first four digits of the
label.
LOCAL Use this key to enable or disable communication through the Hand Controller.
SHIFT UNITS To change the wavelength units press this key, followed by either 1, 2, or 3 and
then press ENTER. The three number keys are labeled with the corresponding
units: 1 is nanometers (nm), 2 is micrometers (µm), and 3 is wave numbers
(cm
-1
) shown as “ν”.
SHIFT Press this key to enable the top half command of any applicable key.
SHIFT DEL Press this key to delete an entry.
ENTER Press this key to complete a command, where applicable and denoted above.