90088262 MCS130B
CORNERSTONE 130B MONOCHROMATORS
66
16.3
60B
KEY REFERENCE
ABORT
If you accidentally press a function key or enter a bad parameter you may press
the ABORT key to clear that command before it executes.
STEP DOWN
Press this key once to move the Cornerstone to shorter wavelengths by the
smallest possible increment. Holding this key causes rapid single stepping
toward lower wavelengths. Press SHIFT and then STEP DOWN to define a
number of steps to move at once. Press ENTER to execute this larger move.
STEP UP
Press this key once to move the Cornerstone to higher wavelengths by the
smallest possible increment. Holding this key causes rapid single stepping
toward higher wavelengths. Press SHIFT and then STEP UP to define a number
of steps to move at once. Press ENTER to execute this larger move.
GO WAVE
This key moves the grating position to a specified output wavelength. Press GO
WAVE, then use the keypad to enter the desired wavelength, and finally pres s
ENTER to execute the move.
SLIT 1
This function is disabled on this model.
SHIFT SLIT 2
This function is disabled on this model.
SLIT 3
This function is disabled on this model.
SHIFT BAND
This function is disabled on this model.
GRAT
Press this key to move to another grating position. Press GRAT, then press
either 1 or 2 on the numeric keypad, and finally press ENTER to execute the
change. The display will update to show the correct parameters for the new
grating.
SHIFT LABEL
This key (located directly above GRAT) provides access to the grating label.
The label is an eight-character alphanumeric field that is used for information
only. Newport assigns the grating blaze wavelength to the label during
calibration. However, you can use the keypad to type any number, t hen pres s
ENTER to accept that new value. The Hand Controller display only s hows t he
first four digits of the label.
LINES
Press this key to change the lines/mm of the grating. This value is used for
wavelength calculations and will affect your calibration. This parameter s hould
be changed only when adding a new grating.
SHIFT CALIB
This button is used to modify the wavelength calibration of the current grat ing.
Use the GO WAVE, STEP DOWN, and STEP UP keys until the light at the
output is at a known wavelength (often the intensity peak for a spectral
calibration lamp). If the wavelength shown in the top row of the display does not
match the known value, press SHIFT CALIB and use the numeric keypad to
Содержание Cornerstone 130B
Страница 1: ...90088262MCS130B Rev B s 1 8m Monochromator Family User s Manual Cornerstone 130B...
Страница 32: ...90088262 MCS130B CORNERSTONE 130B MONOCHROMATORS 32 Figure 23 Model 74010 Filter Wheel...
Страница 42: ...90088262 MCS130B CORNERSTONE 130B MONOCHROMATORS 42 14 13BDIMENSIONS Figure 30 Cornerstone 130B Dimensions...
Страница 44: ...90088262 MCS130B CORNERSTONE 130B MONOCHROMATORS 44 Figure 33 Model 74006 Mounting Plate...
