background image

2

SAFETY PRECAUTIONS

Read  all  of  the  instructions  before  using  this  appliance.  When  using  this 
appliance, always exercise basic safety precautions, including the following: 

Use  this  appliance  only  for  its  intended  purpose  as  described  in  this  operation   
manual.
This  appliance  must  be  properly  installed  in  accordance  with  the  installation 
instructions before it is used. See the installation section for more details.
This  appliance  must  be  connected  to  a  proper  electrical  outlet  with  the  correct 
electrical supply.
Proper grounding must be ensured to reduce the risk of shock and fire. Do not 
cut  or  remove  the  grounding  pin!  If  you  do  not  have  a  three-prong  electric 
receptacle outlet in the wall, have a certified electrician install the proper outlet. 
The wall receptacle must be properly grounded.
Never  unplug  your  appliance  by  pulling  on  the  power  cord.  Always  grasp  the 
plug firmly and pull straight out from the outlet.
Immediately  replace  worn  power  cords,  loose  plugs  and  power  outlets.  If  the 
supply cord is damaged, it must be replaced by the manufacturer or its service 
agent or a similarly qualified person in order to avoid a hazard. 
To  reduce  the  risk  of  electric  shock  or  fire,  do  not  use  extension  cords  or 
adapters to connect the unit to an electrical power source.
Unplug your appliance before cleaning or making any repairs.
We suggest that a certified technician perform the service if for any reason this 
product requires service.
If  your  old  appliance  is  being  discarded,  we  recommend  that  you  remove  the 
door and leave the shelves in place. This will reduce the possibility of danger to 
children.
This  appliance  should  not  be  recessed  or  built  into  an  enclosed  cabinet.  It  is 
designed for freestanding installation only.
Do not operate your appliance in the presence of explosive fumes.
Do not tamper with the controls.
Do not operate this appliance when parts are missing or broken.
Do not use this appliance for commercial use.
This appliance is designed for indoor use only and should not be used outdoors.
To reduce the risk of injury, do not allow children to play in or on the appliance. 
Close supervision is necessary when the appliance is used near children.
The  appliance  door  must  be  closed  during  operation.  Do  not  leave  the  door 
open when children are near the dispenser.
Do not run cord over carpeting or other heat insulators. Do not cover the cord. 
Keep  cord  away  from  traffic  areas,  and  do  not  submerge  in  water.  DO  NOT 
attempt to operate this unit with a damaged cord or plug.
DO NOT roll the kegerator with loaded beer kegs on carpet floor.

1.

2.

3.

4.

5.

6.

7.

8.
9.

10.

11.

12.
13.
14.
15.
16.
17.

18.

19.

20.

Содержание AK-200 SERIES


















Отзывы: