background image

LIMITED MANUFACTURER'S WARRANTY

This  appliance  is  covered  by  a  limited  manufacturer's  warranty.  For  one  year  from 
the original date of purchase, the manufacturer will repair or replace any parts of this 
appliance  that  prove  to  be  defective  in  materials  and  workmanship,  provided  the 
appliance  has  been  used  under  normal  operating  conditions  as  intended  by  the 
manufacturer. 

Warranty Terms: 

During the first year, any components of this appliance found to be defective due to 
materials  or  workmanship  will  be  repaired  or  replaced,  at  the  manufacturer's 
discretion, at no charge to the original purchaser. The purchaser will be responsible 
for any removal or transportation costs. 

Warranty Exclusions: 

The warranty will not apply if damage is caused by any of the following: 
1.  Power failure 
2.  Damage in transit or when moving the appliance 
3.  Improper power supply such as low voltage, defective household wiring or 

inadequate fuses 

4.  Accident, alteration, misuse or abuse of the appliance such as using non-

5.  Use in commercial or industrial applications 
6.  Fire, water damage, theft, war, riot, hostility or acts of God such as hurricanes, 

floods, etc.   

7.  Use of force or damage caused by external influences 
8.  Partially or completely dismantled appliances 

Obtaining Service: 

When  making  a  warranty  claim,  please  have  the  original  bill  of  purchase  with 
purchase date available.  Once confirmed that your appliance is eligible for warranty 
service,  all  repairs  will  be  performed  by  a  NewAir™  authorized  repair  facility.  The 
purchaser will be responsible for any removal or transportation costs. Replacement 
parts  and/or  units  will  be  new,  re-manufactured or  refurbished  and  is  subject  to  the 
manufacturer's discretion. 
For technical support and warranty service, please email [email protected]

16

LIMITED MANUFACTURER'S WARRANTY

 

approved accessories, inadequate air circulation in the room or abnormal 

operating conditions (extreme temperatures) 

Содержание AK-200 SERIES


















Отзывы: