background image

4

SAFETY PRECAUTIONS

Important Safety Precautions of CO

(Carbon Dioxide) Gas

Co

2

  gas  can  be  dangerous!  CO   cylinders  contain  high-pressure  compressed 

2

gas,  which  can  be  hazardous  if  not  handled  properly.  Make  sure  you  read  and 
understand all the procedures for the CO  cylinders before installation.

2

Always connect the CO  cylinder to a regulator! Failure to do so may cause an 

2

explosion resulting in possible death or injury when the cylinder valve is opened.
Never connect the CO  cylinder directly to the product container.

2

Always follow the correct procedures when changing cylinders.
Never drop or throw a CO  cylinder.

2

Always  keep  CO   cylinders  away  from  heat.  Store  extra  cylinder

s

  at  a  cool 

2

place

 

(preferably  lower  than  70°  F).  Securely  fasten  with  a  chain  in  an  upright 

position when storing.
Always ventilate and leave the area immediately if CO  leakage has occurred!

2

There are two safety devices in the pressure system in the form of a valve. One 
safety feature is on the CO  bottle. The second is on the regulator.

2

Never  attempt  to  refill  CO   cylinder

s

  yourself.  CO   tanks  can  be  refilled  at 

2

2

locations  such  as  welding  supply  shops,  party  stores,  fire  supply  shops,  or 
where kegs are purchased.

1.

2.

3.
4.
5.
6.

7.
8.

9.

Beer

Dispenser

  Tower

Beer Line

Keg

Coupler

Beer Keg

(Not Included)

High-Pressure Valve
CO  Bottle

2

Shut Off Safely

CO  Line

2

Double-Gauge
CO  Regulator

2

Low Pressure
Valve

24.75"

23"

13.5"

23"

CO  Tank

2

Содержание AK-200 SERIES


















Отзывы: