background image

5

SAVE THESE INSTRUCTIONS

For Future Use

Risk of child entrapment! Before throwing away your old appliance:

 Take off the doors.

 Leave the shelves or other accessories in place so that children 

   may not easily become trapped inside.

(Note: If the refrigerator has been placed in a horizontal or tilted position for any 
period of time, please wait at least 24 hours before plugging the unit in.)

Proper Location

Ÿ

To  ensure  that  your

 kegerator 

works  to  the  maximum  efficiency  it  was 

designed for, keep  it  in  a  location  where  there  is  proper  air  circulation  and 
electrical outlets.

Ÿ

Choose  a  location  where  the keg

erator 

will  be  away  from  heat  and  will  not 

be exposed to direct sunlight.

Ÿ

This 

kegerator 

is  designed  for  indoor  use  only  --  it  should  not  be  used 

outdoors.

Ÿ

This

 kegerator 

is a freestanding design and should not be placed in a built-in 

or recessed area.

Ÿ

Ke

gerator 

 unit dimensions:

21.3” W x 33.20” H (with casters) x 26.60” D

Ÿ

The following dimensions are recommended for clearances around the 

kegerator

:

 

Sides ……………………5” (12 cm)

Back ……………………5” (12 cm)

DANGER!

Use of Extension Cords

Ÿ

Always  avoid  using  an  extension  cord  because  of  potential  safety  hazards  in 
certain  conditions.  If  it  is  necessary  to  use  an  extension  cord,  use  only  a  3-wire 
extension  cord  that  has  a  3-blade  grounding  plug. And  use  the  cord  with  No.  14 
AWG minimum size and rated not less than 1875watts.

Assembly Instructions

Ÿ

Read assembly instructions carefully to ensure that you understand all installation 
instructions before installing the 

kegerator

. If after completing the process

 

ASSEMBLY INSTRUCTIONS

Содержание AK-200 SERIES


















Отзывы: