New Rock Technologies MX100-AG, Руководство по установке, Страница: 20 / 23

Shanghai New Rock Technologies, Inc. Page 20/23
3
Powering up the Gateway
3.1
Verification Before Power-up
3.1.1
Checking Appearance
This is a review process of the installation work, including the chassis, wiring, connectors, ports,
labels and site as described in the subsections.
Gateway
z
Check whether there is adequate clearance around the gateway for thermal, and whether the
workbench or rack for the moounting of the gateway is firm enough.
z
Check whether the gateway is correctly connected to the configuration terminal and other devices.
Cable
z
Check whther the Ethernet cable, the FXS and FXO cables are connected properly.
z
Check whether the grouding cable is connected properly.
z
Check whether the power cord is connected to the proper power supply as required.
Port and Connector
Check whether the ports and connectors are secured.
Equipment Room
Check whether the temperature and humidity in the equipment room are within the proper range. The
humidity should be kept at 10% to 90% non-condensing and the temperature should be kept at
0-40 .
℃
3.1.2
Checking Power Supply
Check whether the power supply is in normal operation with a multimeter.
3.2
Powering up the Gateway
Turn the power switch to “ON” position. Check the status of PWR LED, and if it is lit the gateway is
powered properly.