New Rock Technologies MX100-AG, Руководство по установке, Страница: 17 / 23

Shanghai New Rock Technologies, Inc. Page 17/23
Step 2
Insert one end of the cable into the RJ11 socket (MX8) or RJ45 socket
（
MX51
）
corresponding to the
FXO interface of the equipment, and connect the other end of the cable with the interface of PBX
extension line or the PSTN line.
2.7
Connecting the FXS/FXO Cable of MX100-AG Series
For the MX100-AG, the FXS/FXO interface type is the CHAMP socket, and the connection steps for
its cable are as follows with the MX100-AG-8S/8 as example:
Step 1
Plug the champ connector of the FXS/FXO cable to FXS/FXO port of the interface card.
Step 2
Attach the wire pairs at the other end of the cable to the patch panel in correct color coding order.
Step 3 Through the interconnection of the patch panel, the other end of the FXS interface connects with the
telephones, fax machines or the trunk lines of PBX. The other end of the FXO interface connects with
the extension lines of PBX or the PSTN lines.
Figure 2-10 FXS/FXO Interface Cable Connecting MX100-AG Series
Please refer to the appendix: Wiring Scheme for CHAMP Connector
2.8
Connecting the FXS/FXO Cable of MX120 Series
The connection steps of the FXS/FXO interface cable are as follows with the MX120-12S/12 as
example:
Step 1
Prepare the CAT-5 cable in proper length with RJ45 plug at one end.
Step 2
Insert the RJ45 plug of the cable into the RJ45 socket corresponding to the FXS/FXO port in the
MX120 interface card. Attach wire pairs at the other end of the cable to the patch panel in correct
color coding order.
Step 3
Through the interconnection of the patch panel, the other end of the FXS interface connects with the
telephones, fax machines or trunk lines of PBX, the other end of the FXO interface connects with the
extension lines of PBX or PSTN lines.