New Rock Technologies MX100-AG, Руководство по установке, Страница: 15 / 23

Shanghai New Rock Technologies, Inc. Page 15/23
The connection steps of the FXS interface cable are as follows:
Step 1
Prepare a two-wire telephone line with RJ11 connectors at each end.
Step 2 Plug one end of the cable into a FXS port of the gateway, and plug the other end into a RJ11 jack of a
telephone set, or a FAX machine, or a trunk interface of a PBX, as illustrated in the Figure 2-7.
Figure 2-7 Connect to the FXS interface of MX8 and MX51 Series
2.5.2
MX100-AG Series
FXS interface connects with the analog telephone via a 25-pair analog cable.
When connecting FXS or FXO interface cable, identity the interface type in each port of the interface
card, be sure to match the line type at far end to port at equipment side.
Insertion and extraction of the interface card must be done under the condition of power off.
The connection steps of the FXS interface cable are as follows:
Step 1 Connect the CHAMP connector of the cable with the CHAMP socket in the interface card of the
MX100-AG gateway.
Step 2
Attach the wire pairs at the other end of the cable to the patch panel in correct color coding order.
Step 3
Through the interconnection of the patch panel, the other end of the FXS interface connects with the
telephones, fax machines or other equipments.
Figure 2-8 FXS Interface Cable Connecting MX100-AG Series
Please refer to the appendix: Wiring Scheme for CHAMP Connector