New Holland TC21D, Руководство оператора

Страница: 58 / 102

SECTION 3 - LUBRICATION AND MAINTENANCE
3-7
Changing the Fuel Filter
NOTE: Change the diesel fuel filter after the first 50
hours of operation, then following every 200
operating hours thereafter.
1. Close the shutoff valve (the handle should be
pointing to the “C” position).
2. Remove the sediment bowl by rotating the
retaining nut, 1.
3. Open the fuel shutoff valve, 2, to drain any
remaining water from the tank.
4. Discard the old element, 3, and install a new
element.
5. Inspect the O rings, 4 and 5, and replace if
necessary.
6. Install and securely tighten the sediment bowl.
7. Open the fuel shutoff valve (the handle should be
pointing to the “O” position), 2, so fuel will flow to
the filter.
8. Bleed the fuel filter and injection pump as
described below in “Bleeding the Fuel System.”
Bleeding the Fuel System
Bleed the fuel system if:
•
it has been drained.
•
a new filter element has been installed.
•
the tractor has run out of fuel.
•
the lines leading to or from the filter have been
disconnected.
•
the injection pump has been removed and
reinstalled.
1
2 3
4 5
8
NOT FOR REPRODUCTION