New Holland TC21D, Руководство оператора

Страница: 31 / 102

SECTION 2 - OPERATION
2-8
LIGHTING
Your tractor is equipped with:
•
Flasher warning lights, 1, Figure 11
•
Taillight, 2, Figure 2-9
•
Headlights, 3, Figure 13
•
Rear work light (optional), 4, Figure 13
10020239
1
2
11
Headlights and Taillights
The four headlight halogen bulbs and the taillight are
turned on and off using push/pull type light switch, 1.
Pull the switch out for the lights to be on, push in for
off position. (Key must be in the “ON” position for the
lights to operate.)
Flasher Warning Lights
The two flasher warning lights are activated by
turning the flasher warning light switch, 2, in the
clockwise direction. For your protection, use the
flasher warning lights and the SMV (Slow Moving
Vehicle) emblem when traveling on public roads, day
or night.
Flasher Turn Lights (Turn Signals)
The turn signal lights are activated by moving the turn
signal switch, 3, to the right for right turns and to the
left for left turns. The key switch does have to be in
the ACC/RUN position for the turn signal to operate.
When signaling a turn, the designated turn side
amber light and red taillight will flash.
NOTE: If the Flashing Warning (Hazard) lights are
operated at the same time when the turn signal is
activated, the hazard light for the opposite side of
turning direction will stop flashing and illuminate
continuously.
10020249
1
2
3
12
NOT FOR REPRODUCTION