New Holland TC21D, Руководство оператора

Страница: 40 / 102

SECTION 2 - OPERATION
2-17
HOOD LATCH
As viewed from the front of the tractor:
1. To raise the hood, move the latch release lever,
1, to the right and lift the hood to its fully raised
position. A support link, 2, will automatically hold
the hood in the fully raised position.
2. To lower the hood, lift up on the hood slightly and
pull the support link towards you, so that the
support pin is no longer in the catch position.
Lower the hood until it is retained by the latch
mechanism.
19983648
1
31
IMPORTANT: Do not attempt to lower the hood
without moving the support link. Attempting to force
the hood down can result in bending or breaking of
the hood and support linkage.
NOTE: Keep the latch mechanism free of dirt and
debris so that the latch assembly will operate
properly.
19981245
2
32
THREE-POINT LINKAGE
The tractor’s three-point linkage is used to attach
three-point mounted equipment which is usually
PTO operated, such as rotary mowers, tillers, flail
mowers, snowblowers, etc. The three linkage points
are the two lower lift arms and the top link.
The standard three-point linkage has easy to adjust
sway bars to control lateral movement of the lift arms.
The height of the right-hand lift arm and the top link
can be adjusted by loosening the jam nut and turning
the level crank pin.
19982082
33
NOT FOR REPRODUCTION