New Holland TC21D Скачать руководство пользователя страница 34

Страница: 34 / 102

SECTION 2 - OPERATION

2-11

FRONT-WHEEL DRIVE

The front-wheel drive option is controlled by a lever,

1, located on the right-hand control pod.

To engage front-wheel drive, depress the clutch

pedal fully and push the lever fully forward. To

disengage front-wheel drive, depress the clutch

pedal and pull the lever fully rearward.

IMPORTANT:

Use front-wheel drive when additional

traction is required while operating on loose soil, in

wet, slippery conditions, or on slopes. For normal

operation on firm soil, level hard surfaces, or when

roading the unit at high speeds, disengage the

front-wheel drive to maximize tire and driveline life

and to economize on fuel.

19981877

HYDROSTATIC TRANSMISSION (H.S.T.) MODEL

H.S.T. FOOT PEDAL

The ground speed of tractors equipped with a

hydrostatic transmission is continuously variable,

from zero to full rated speed in each range. Speed is

controlled by the H.S.T. rocker pedal located on the

right-hand foot platform.

For forward travel, depress the forward pad on the

pedal until the desired ground speed is reached. For

reverse travel, depress the rear pad on the pedal.

Unless the H.S.T. speed cruise control switch, Figure

2-20, is in the engaged position, the transmission

returns to neutral and the tractor stops when the

pedal is released.

19983654

GEAR TRANSMISSION

TRANSMISSION MAIN SHIFT LEVER AND

RANGE LEVER

The transmission main shift lever, 1, and range lever,

2, are located on the left-hand control pod. The shift

pattern of the main shift lever is molded into the knob.

The range lever has three ranges and two neutral

positions. Each range has three forward gears and

one reverse gear, providing a total of nine forward

and three reverse speeds.

IMPORTANT:

Do not attempt to change gears while

the tractor is moving. The 9 x 3 transmission is not

synchronized. The clutch pedal must be depressed

and tractor motion stopped to change gear ratios with

the main shift lever or the range shift lever.

19981864

NOT FOR REPRODUCTION

Содержание TC21D







































































































Результаты поиска

Содержание TC21D

Отзывы:

Похожие инструкции для TC21D

Бренды по названию

Популярные бренды

New Holland TC21D, Руководство оператора

Результаты поиска

Содержание TC21D

Отзывы:

Похожие инструкции для TC21D

Бренды по названию

Популярные бренды