New Holland TC21D Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 102

background image

0-1

TO THE OWNER

This manual contains information concerning the adjustment and maintenance of your New Holland TC21D and

TC24D. You have purchased a dependable machine, but only by proper care and operation can you expect to

receive the performance and long service built into this tractor. Please have all operators read this manual care-

fully and keep it available for ready reference.

This machine was designed to power and propel itself. It is intended to pull or carry tractor attachments or load

and move materials when equipped with a front end loader with a variety of buckets. Only attachments recom-

mended and approved by New Holland should be used with your tractor.

Your New Holland dealer will instruct you in the general operation of your tractor. (Refer to the “Delivery Report”

at the back of this manual.) Your dealer’s staff of factory-trained service technicians will be glad to answer any

questions that may arise regarding the operation of your tractor.

Your New Holland dealer carries a complete line of genuine New Holland service parts. These parts are manufac-

tured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be

prepared to give your dealer the model and serial number of the engine and tractor, when ordering parts. Locate

these numbers now and record them below. Refer to the “General Information” section of this manual for the loca-

tion of the model and serial numbers of your skid steer.

This safety alert symbol indicates important safety messages in this manual. When you see this symbol,

carefully read the message that follows and be alert to the possibility of personal injury or death.

Pictures in this manual may show protective shielding open or removed to better illustrate a particular

feature or adjustment.
Be certain, however, to close or replace all shielding before operating the machine.

IMPROVEMENTS

New Holland North America, Inc. is continually striving to improve its products. We reserve the right to make im-

provements or changes when it becomes practical and possible to do so, without incurring any obligation to make

changes or additions to the equipment sold previously.

NOT FOR REPRODUCTION

«
1
2
3
4
...
»

Содержание TC21D







































































































Отзывы:

Нет отзывов

Похожие инструкции для TC21D

Бренд: Kioti Страницы: 32

MOTOR GRADERS G930

Бренд: Volvo Страницы: 10

G970, G976, G990

Бренд: Volvo Страницы: 17

Бренд: Jonsered Страницы: 56

Бренд: Yard Machines Страницы: 60

WEATHERBRAKE 2186

Бренд: Femco Страницы: 7

Grain Belt Plus

Бренд: Honey Bee Страницы: 179

Grain Belt Plus 3055

Бренд: Honey Bee Страницы: 253

Бренд: ASV Страницы: 68

Бренд: MASSEY FERGUSON Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды