NETZSCH LFA 447 Nanoflash, Руководство по эксплуатации

Страница: 6 / 89

General Information
LFA 447
TM
01/09 J:\LFA447\CHAPTER1.DOC
4
Maintenance
Obligation The operator of the system must ensure that the instrument is
operated in perfect condition at all times.
Proper Set-up of the
Work Stations The operator must guarantee the openness and cleanliness of
the work stations at the instrument through appropriate
instruction and inspections.
Shut-down For all maintenance work, the instrument must be switched off
and unplugged.
Removal of
Protective Devices Protective devices may only be removed when the instrument is
switched off and unplugged. It is imperative that the
protective devices be replaced before starting the instrument.
Checks following
Maintenance or
Repair Work After maintenance or repair work, a check should be made to
ensure that all protective devices are in place and operate
properly. Only then should the instrument be started.
Industry-specific
Accident Prevention
Regulations The operator must observe the relevant regulations and
protective measures when handling the required gases. In
addition, possible reactions with the materials used must be
considered. At operating temperatures above 55°C, protective
gloves must be worn. In any case, the industry-specific and local
accident prevention regulations are also valid for the
instrument.
Disposal of
Production Materials
Production materials are to be disposed of according to local
regulations.
Maintenance or
Repair Products sent in for maintenance or repair should, to the extent
possible, be free of harmful substances (e.g. radioactive, toxic,
caustic or microbiological materials). Otherwise, the type of
contamination must be declared. Products not explicitly
declared to be "free of harmful substances" will be
decontaminated at the expense of the sender.