Supplemental Information
122
Dual Band Wireless VDSL2 + Ethernet Gateway
Factory Settings
You can restore the gateway to its factory settings.
To restore factory settings:
Use a paperclip to press and hold the
Reset
button for at least seven seconds.
The gateway resets and returns to the factory configuration settings shown in the following
table.
Table 3. Gateway factory default settings
Feature
Default Behavior
Gateway login
User login URL
www.routerlogin.net or http://192.168.0.1
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address.
WAN MTU size
1492
Port speed
AutoSensing
Local area
network (LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.02-192.168.0.254
Time zone
Greenwich Mean Time (GMT) +10
Time adjusted for daylight saving
time
Disabled
Wireless
Wireless communication
Enabled
SSID name
Preset. For information, see the product label.
Security
Broadcast SSID
Enabled
Transmission speed
Auto
Note:
Maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput varies.
Network conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead lower actual data
throughput rate.
Country/region
Australia
