Advanced Settings
93
R6200v2 Smart WiFi Router
5.
Click the
Add
button.
The screen changes back to the list screen.
6.
Add each computer or device you want to allow to connect wirelessly.
7.
Select the
Turn Access Control On
check box.
8.
Click the
Apply
button.
To edit a wireless device or delete it from the access list:
1.
Select
ADVANCED > Advanced Setup > Wireless Settings
.
The Advanced Wireless Settings screen displays.
2.
In the table, select the radio button next to the wireless device that you want to edit or
delete.
3.
Do one of the following:
•
Click the
Edit
button.
The Edit Wireless Card screen displays.
a.
Edit the address information.
b.
Click the
Accept
button.
•
Click the
Delete
button.
The address is removed from the table.
Wireless Access Point
You can set up the router to run as an access point (AP) on the same local network as
another router.
To set up the router as an AP:
1.
Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router.
Cable this port to a LAN port
on the other router
2.
Select
ADVANCED > Advanced Setup > Wireless Settings
.
3.
Select the
Enable Access Point Mode
check box.
