8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Manage and Monitor the Switch
User Manual
75
•
Short Cable Power Saving
. Dynamically detects and adjusts power that is required for
the detected cable length.
The setting of the administrative mode is either Enable or Disable. The default setting is
Enable.
•
Link-Down Power Saving
. Reduces the power consumption considerably when the
network cable is disconnected. When the network cable is reconnected, the switch
detects an incoming signal and restores normal power.
The setting of the administrative mode is either Enable or Disable. The default setting is
Enable.
Note:
You can use only the local browser interface to manage the power
savings options. You cannot use the ProSAFE Plus Utility to do so.
To use the local browser interface to manage the power saving options:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Information page displays.
5.
Select
System > Management > Power Saving Mode
.
6.
Enable or disable the power saving options:
•
EEE
. By default, the
Disable
radio button is selected. To enable EEE, select the
Enable
radio button.
•
Short Cable Power Saving
. By default, the
Enable
radio button is selected. To
disable short power cable saving, select the
Disable
radio button.
