8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Hardware Setup
User Manual
14
Safety instructions and warnings
Use the following safety guidelines to ensure your own personal safety and to help protect
your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
•
This product is designed for indoor use only in a temperature-controlled (0–50°C or
32–122°F) and humidity-controlled (90 percent maximum relative humidity,
noncondensing) environment.
Any device that is located outdoors and connected to this product must be properly
grounded and surge protected.
To the extent permissible by applicable law, failure to follow these guidelines can result in
damage to your NETGEAR product, which might not be covered by NETGEAR’s
warranty.
•
Observe and follow service markings:
-
Do not service any product except as explained in your system documentation.
-
Opening or removing covers that are marked with the triangular symbol with a
lightning bolt can expose you to electrical shock.We recommend that only a trained
technician services components inside these compartments.
•
If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
-
The power cable, extension cable, or plug is damaged.
-
An object fell into the product.
-
The product was exposed to water.
-
The product was dropped or damaged.
-
The product does not operate correctly when you follow the operating instructions.
•
Keep your system away from radiators and heat sources. Also, do not block cooling
vents.
•
Do not spill food or liquids on your system components, and never operate the product in
a wet environment. If the system gets wet, see the appropriate section in your
troubleshooting guide, or contact your trained service provider.
•
Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
•
Use the product only with approved equipment.
•
Allow the product to cool before removing covers or touching internal components.
•
Operate the product only from the type of external power source indicated on the
electrical ratings label. If you are not sure of the type of power source required, consult
your service provider or local power company.
