NETGEAR prosafe WAC740, Руководство по установке

Страница: 36 / 36

Supplemental Information
36
ProSAFE Dual Band Wireless AC Access Point Model WAC740
Factory Default Settings
You can use the Reset button located on the rear panel of the access point (see Rear Panel
on page 9) to reset all settings to their factory defaults.

To reset the access point to factory default settings using the Reset button:
1. Insert a device such as a straightened paper clip into the opening.
2. Press and hold the recessed Reset button for about ten seconds, and then release the
button.
The access point reboots. The top panel LEDs turn off and light again.
Environmental
specifications • Operating temperature: 0 to 40°C (32 to 104°F)
• Operating humidity: 10–90%, noncondensing
Electromagnetic compliance • FCC Part 15 SubPart B
• FCC Part 15 SubPart C
• FCC Part 15 SubPart E
• CE
• C-TICK
Table 4. Factory default configuration settings
Feature Description
DHCP client Enabled
Access point IP address
settings
• IP address: 192.168.0.160
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
Wireless controller IP
address Blank
Management VLAN VLAN 1, untagged
Link aggregation Disabled
User name (case-sensitive)
for login admin
Login password
(case-sensitive) for login password
WiFi communication • 2.4 GHz radio enabled
• 5 GHz radio enabled
Table 3. Technical specifications (continued)
Feature Description