NETGEAR prosafe WAC740, Руководство по установке

Страница: 35 / 36

Supplemental Information
35
ProSAFE Dual Band Wireless AC Access Point Model WAC740
Technical Specifications
Table 3. Technical specifications
Feature Description
Supported WiFi radio
frequencies and WiFi
modes • 2.4 GHz band
- 802.11ng
- 801.11bg
- 802.11b
• 5 GHz band
- 802.11ac
- 802.11na
- 802.11a
Maximum theoretical
throughput 2.3 Mbps simultaneous throughput (600 Mbps on the 2.4 GHz band and 1700
Mbps on the 5 GHz band)
Management The access point is not intended as a standalone access point: The access point
must be managed through a NETGEAR wireless controller.
The access point provides a limited web management interface that lets you
configure the following features that are related to controller management:
• DHCP client
• Access point IP settings
• Wireless controller IP address
• Management VLAN settings
• Link aggregation settings
Hardware interfaces • 1 LAN 100/1000/2500BASE-T Gigabit Ethernet (RJ-45) PoE+ port
• 1 LAN 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port
• 1 RJ-45 console port functioning with the following settings: 115200 K default
baud rate, 8 data bits, no (N) parity bit, and one (1) stop bit
• 4 external reverse SMA connectors for optional 2.4 or 5GHz antennas
Status LEDs • Power LED
• Activity LED
• LAN 1 LED
• LAN 2 LED
• WLAN 2.4 GHz LED
• WLAN 5 GHz LED
PoE+ requirements 802.3at (42 VDC–57 VDC, 600mA)
Note: PoE might be considered a network environment 0 per IEC TR 62101, and
thus the interconnected ITE circuits might be considered safety extra low voltage
(SELV).
PoE+ power consumption 17.9W
Optional power adapter 12 VDC, 2.5A. The plug is localized to country of sale.
Physical specifications • Dimensions (h x w x d): 7.76 x 7.76 x 1.57 in. (197.3 x 197.3 x 40 mm)
• Weight: 1.73 lb (785 g)