NETGEAR JWNR2000 - Wireless- N 300 Router, Руководство пользователя

Страница: 44 / 144

NETGEAR Wireless-N 300 Router JWNR2000 User Manual
2-14 Safeguarding Your Network
v1.0, February 2010
The JWNR2000 router provides two methods for connecting to a wireless client that supports
WPS, described in the following sections:
• “Push Button Configuration” ”
• “Security PIN Entry” on page 2-15
Push Button Configuration
There are two methods to enable a wireless client to join a network using a push button on the
router: using the physical push button or using the software button in the Add WPS Client screen.
Using the Physical Push Button
1. Press the WPS push button on the JWNR2000 router for over 5 seconds.
The WPS LED begins to blink in a regular pattern. While the light is blinking, you have 2
minutes to enable WPS on the client that you are trying to connect to the router.
2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The JWNR2000 router’s WPS LED ceases blinking and remains on when one of these
conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, no WPS security settings will be specified in the JWNR2000 router.
Using the Software Button in the Add WPS Client Screen
1. Log in to the router as described in “Logging In To Your Wireless Router” on page 1-2 .
2. Select Add WPS Client in the main menu, and click Next.
3. Select the Push Button setup method.
Figure 2-6