manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство CLI

Поделиться
Скачать
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Скачать руководство пользователя страница 553

Managed Switch CLI Manual, Release 8.0.3

Utility Commands

9-16

v1.0, July 2010

If option <

changed

> is used, this command displays/capture commands with settings/

configurations that differ from the defaul value.

•

If all the flags in a particular group are enabled, then the command displays 

trapflags

 

<group name>

 

all

.

•

If some, but not all, of the flags in that group are enabled, the command displays 

trapflags

 

<groupname>

 

<flag-name>.

show running-config interface

This command shows the current configuration on a particular interface. The interface could be a 
physical port or a virtual port—like a LAG or VLAN. The output captures how the configuration 
differs from the factory default value.

show sysinfo

This command displays switch information. 

Format

show running-config [all | <scriptname> | changed]

Mode

Privileged EXEC 

Format

show running-config interface {<unit/slot/port>} | VLAN <id> | LAG <id>}

Mode

Interface Config

Format

show sysinfo

 

Mode

Privileged EXEC 

Term

Definition

Switch 
Description

Text used to identify this switch.

System Name

Name used to identify the switch.The factory default is blank. To configure the system 
name, see 

“snmp-server” on page 10-41

.

System Location

Text used to identify the location of the switch. The factory default is blank. To configure 
the system location, see 

“snmp-server” on page 10-41

.

System Contact

Text used to identify a contact person for this switch. The factory default is blank. To 
configure the system location, see 

“snmp-server” on page 10-41

.

System Object ID

The base object ID for the switch’s enterprise MIB.

System Up Time

The time in days, hours and minutes since the last switch reboot.

Содержание GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды