manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство CLI

Поделиться
Скачать
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Скачать руководство пользователя страница 374

Managed Switch CLI Manual, Release 8.0.3

IP Multicast Commands

5-33

v1.0, July 2010

show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.

If you use the 

detail

 keyword, the following fields appear:

Robustness

The tuning for the expected packet loss on a subnet. If a subnet is expected to be have a 
lot of loss, the Robustness variable may be increased for that interface.

Startup Query 
Interval

The interval between General Queries sent by a Querier on startup. 

Startup Query 
Count

The number of Queries sent out on startup, separated by the Startup Query Interval.

Last Member 
Query Interval

The Maximum Response Time inserted into Group-Specific Queries sent in response to 
Leave Group messages. 

Last Member 
Query Count

The number of Group-Specific Queries sent before the router assumes that there are no 
local members.

Format

show ip igmp interface membership <multiipaddr> [detail]

Mode

Privileged EXEC

Term

Definition

Interface

Valid unit, slot and port number separated by forward slashes.

Interface IP

The IP address of the interface participating in the multicast group.

State

The interface that has IGMP in Querier mode or Non-Querier mode.

Group 
Compatibility 
Mode

The group compatibility mode (v1, v2 or v3) for the specified group on this interface.

Source Filter 
Mode

The source filter mode (Include/Exclude) for the specified group on this interface. This is “-
----” for IGMPv1 and IGMPv2 Membership Reports.

Term

Definition

Interface

Valid unit, slot and port number separated by forward slashes.

Group 
Compatibility 
Mode

The group compatibility mode (v1, v2 or v3) for the specified group on this interface.

Source Filter 
Mode

The source filter mode (Include/Exclude) for the specified group on this interface. This is “-
----” for IGMPv1 and IGMPv2 Membership Reports.

Term

Definition

Содержание GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды