manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство CLI

Поделиться
Скачать
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Скачать руководство пользователя страница 401

Managed Switch CLI Manual, Release 8.0.3

IPv6 Multicast Commands

6-20

v1.0, July 2010

When 

<group-address

> is specified, the following fields are displayed for each multicast 

group and each interface.

The following table is displayed to indicate all the sources associated with this group.

Example: The following shows examples of CLI display output for the commands.

(Switch) #show ipv6 mld groups ?

<group-address>          Enter Group Address Info.

<unit/slot/port>         Enter interface in unit/slot/port format.

(Switch) #show ipv6 mld groups 1/0/1  

Group Address.................................. FF43::3

Interface...................................... 1/0/1

Up Time (hh:mm:ss)............................. 00:03:04

Expiry Time (hh:mm:ss)......................... ------ 

(Switch) #show ipv6 mld groups ff43::3

Interface...................................... 1/0/1

Group Address.................................. FF43::3

Last Reporter.................................. FE80::200:FF:FE00:3

Field

Description

Interface

Interface through which the multicast group is reachable.

Group Address

The address of the multicast group.

Last Reporter

The IP Address of the source of the last membership report received for this multicast 
group address on that interface.

Filter Mode

The filter mode of the multicast group on this interface. The values it can take are 

include

 

and 

exclude

.

Version 1 Host 
Timer

The time remaining until the router assumes there are no longer any MLD version-1 Hosts 
on the specified interface.

Group Compat 
Mode

The compatibility mode of the multicast group on this interface. The values it can take are 

MLDv1

 and 

MLDv2

.

Field

Description

Source Address

The IP address of the source.

Uptime

Time elapsed in hours, minutes, and seconds since the source has been known.

Expiry Time

Time left in hours, minutes, and seconds before the entry is removed.

Содержание GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды