manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство CLI

Поделиться
Скачать
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Скачать руководство пользователя страница 514

Managed Switch CLI Manual, Release 8.0.3

Quality of Service (QoS) Commands

8-27

v1.0, July 2010

If the class-name is specified the following fields are displayed:

If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. 
The following fields are displayed:

show diffserv

This command displays the DiffServ General Status Group information, which includes the 
current administrative mode setting as well as the current and maximum number of rows in each of 
the main DiffServ private MIB tables. This command takes no options.

Term

Definition

Class Name

The name of this class.

Class Type

A class type of ‘all’ means every match criterion defined for the class is evaluated 
simultaneously and must all be true to indicate a class match. 

Class Layer3 
Protocol

The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.

Match Criteria

The Match Criteria fields are only displayed if they have been configured. Not all platforms 
support all match criteria values. They are displayed in the order entered by the user. The 
fields are evaluated in accordance with the class type. The possible Match Criteria fields 
are: Destination IP Address, Destination Layer 4 Port, Destination MAC Address, 
Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP 
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and 
Source Layer 4 Port.

Values

The values of the Match Criteria.

Term

Definition

Class Name

The name of this class. (Note that the order in which classes are displayed is not 
necessarily the same order in which they were created.)

Class Type

A class type of ‘all’ means every match criterion defined for the class is evaluated 
simultaneously and must all be true to indicate a class match.

Reference Class 
Name

The name of an existing DiffServ class whose match conditions are being referenced by 
the specified class definition.

Format

show diffserv

Mode

Privileged EXEC

Содержание GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды