manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство CLI

Поделиться
Скачать
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Скачать руководство пользователя страница 335

Managed Switch CLI Manual, Release 8.0.3

Routing Commands

4-87

v1.0, July 2010

no ip rip send version 

This command configures the interface to allow RIP control packets of the default version to be 
sent. 

hostroutesaccept

This command enables the RIP hostroutesaccept mode.

no hostroutesaccept

This command disables the RIP hostroutesaccept mode.

split-horizon

This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems 
caused by including routes in updates sent to the router from which the route was originally 
learned. The options are: None - no special processing for this case. Simple - a route will not be 
included in updates sent to the router from which it was learned. Poisoned reverse - a route will be 
included in updates sent to the router from which it was learned, but the metric will be set to 
infinity.

Format

ip rip send version {rip1 | rip1c | rip2 | none}

Mode

Interface Config

Format

no ip rip send version

Mode

Interface Config

Default

enabled

Format

hostroutesaccept

Mode

Router RIP Config

Format

no hostroutesaccept

Mode

Router RIP Config

Default

simple

Содержание GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды