Net2Phone 2-Port Gateway, Руководство пользователя

Страница: 26 / 89

2-Port Gateway User’s Guide
20
10. Click the Save button.
11. The 2-Port Gateway should prompt you
to reboot the device. If not, reboot the 2-
Port Gateway by unplugging the power
cord from the back of the 2-Port
Gateway, waiting three seconds, and
plugging the power cord back in.
Setting up Point-to-Point Protocol over
Ethernet (PPPoE)
PPPoE is a specification for connecting users on
a broadband connection to the Internet through
a common broadband medium, such as a single
DSL line, wireless connection, or cable modem.
Some broadband service providers use PPPoE
to establish communications with an end-user.
Check with your broadband service provider to
see if they use PPPoE. If they do, you will have
to enable PPPoE via the 2-Port Gateway’s Web
Management Tool page.
To enable PPPoE:
1. Log in to the 2-Port Gateway’s Web
Management Tool using the following IP
address: http://192.168.100.1 .
2. Click the Configure Settings menu
folder (if not open).
3. Click WAN Configuration .
4. At the bottom of the WAN Configuration
page, enter your PPPoE User Name.
5. Enter your PPPoE Password.