Net2Phone 2-Port Gateway, Руководство пользователя

Страница: 14 / 89

2-Port Gateway User’s Guide
8
Setting Up Your 2 -Port Gateway
Your 2-Port Gateway can be used as a router to
connect up to 253 additional devices (such as PCs
or hubs) to create a LAN environment, as well as a
VoIP device allowing you to connect two analog
telephones to place inexpensive calls over the
Internet.
While one of the primary functions of the 2-Port
Gateway is as a router, you can choose to use it as
a VoIP device only. This chapter describes how to
set up the 2-Port Gateway to perform both functions.
You will perform the following basic, high-level steps,
which are outlined in more detail starting on page
10:
1. Install the 2-Port Gateway in its location and
connect the cabling.
2. Connect your PC to the 2-Port Gateway.
3. Reboot your PC and verify that the 2-Port
Gateway is accessible.
4. Log into the 2-Port Gateway’s Web
Management Tool to configure your WAN
and LAN settings as necessary (i.e., change
Point-to-Point Protocol over Ethernet
(PPPoE) and Static/DHCP settings, if
necessary).
5. Input your Net2Phone account(s) via the
Web Management Tool.
6. Reboot the 2-Port Gateway.